Elevator system using PLC - Sandeep Sahu,Inder Pal Singh,Saurya Jyoti Banik
-30% ar kodu BOOKS
Piegāde 12-18 darba dienu laikā
30 dienu atgriešanas politika
The purpose of doing this project is to design and implement a three floor elevator control system. Each floor was to have its own illuminated push button to call the elevator to a demanded floor. The elevator door was to be simulated with the use of a 12VDC bench-top mounted motor that opened, stayed open, and reversed after ten seconds at each floor after being called. A 12V DC motor was used to hoist the ... Pilns apraksts
Jums varētu patikt arī
TOP
If Anyone Builds It, Everyone Dies: The Case Against Superintelligent AI
Eliezer Yudkowsky, Nate Soares
-30% ar kodu BOOKS
Piegādātāja noliktavā
TOP
Open Circuits: The Inner Beauty of Electronic Components
Eric Schlaepfer, Windell Oskay
-30% ar kodu BOOKS
Piegādātāja noliktavā
TOP
Get started with MicroPython on Raspberry Pi Pico: The Official Raspberry Pi Pico Guide
-30% ar kodu BOOKS
Piegādātāja noliktavā
TOP
Nucleo Boards Programming with the STM32CubeIDE: Hands-on in more than 50 projects
-30% ar kodu BOOKS
Piegādātāja noliktavā
TOP
Practical Electronics for Inventors
-30% ar kodu BOOKS
Piegādātāja noliktavā
TOP
Data-Driven Science and Engineering: Machine Learning, Dynamical Systems, and Control
Steven L. Brunton, J. Nathan Kutz
-30% ar kodu BOOKS
Piegādātāja noliktavā
TOP
Fundamentals of Aerodynamics ISE
Christopher Cadou, John D. Anderson
-30% ar kodu BOOKS
Piegādātāja noliktavā
TOP
Black Holes: The Key to Understanding the Universe
-30% ar kodu BOOKS
Piegādātāja noliktavā
TOP
KiCad Like A Pro - Fundamentals and Projects: Getting started with the world's best open-source PCB tool
-30% ar kodu BOOKS
Piegādātāja noliktavā
TOP
Foundations of Flavor: The Noma Guide to Fermentation: Including Step-By-Step Information on Making and Cooking with: Koji, Kombuchas, Shoyus, Misos, Vinegars, Garums, Lacto-Ferments and black Fruits Vegetables
-30% ar kodu BOOKS
Piegādātāja noliktavā
TOP
Make: Electronics: Learning by Discovery: A hands-on primer for the new electronics enthusiast
-30% ar kodu BOOKS
Piegādātāja noliktavā
TOP
The Idea Factory: Bell Labs and the Great Age of American Innovation
-30% ar kodu BOOKS
Piegādātāja noliktavā
TOP
Flowers For Algernon: A Modern Literary Classic
-30% ar kodu BOOKS
Piegādātāja noliktavā
TOP
Professional SMD Assembly: Practical Low-Cost Methods for Reliable PCB Production
-30% ar kodu BOOKS
Piegādātāja noliktavā
TOP
Blood in the Machine: The Origins of the Rebellion Against Big Tech
-30% ar kodu BOOKS
Piegādātāja noliktavā
TOP
Mastering the Arduino Uno R4: Programming and Projects for the Minima and WiFi
-30% ar kodu BOOKS
Piegādātāja noliktavā
TOP
Learning the Art of Electronics: A Hands-On Lab Course
Thomas C. Hayes, Paul Horowitz, David Abrams
-30% ar kodu BOOKS
Piegādātāja noliktavā
TOP
AI 2041: Ten Visions for Our Future
-30% ar kodu BOOKS
Piegādātāja noliktavā
Aprašymas
The purpose of doing this project is to design and implement a three floor elevator control system. Each floor was to have its own illuminated push button to call the elevator to a demanded floor. The elevator door was to be simulated with the use of a 12VDC bench-top mounted motor that opened, stayed open, and reversed after ten seconds at each floor after being called. A 12V DC motor was used to hoist the elevator and IR sensors were used to indicate when the elevator was at the floor in position to open. The entire system included a master start-stop circuit to ensure that the operation could be completely shut down for emergencies or repair. The final aspect of this experiment was to intelligently organize the ladder logic to make troubleshooting easier. To do this, all of the subroutine jumps were placed in the second ladder and the actual subroutines in its respective ladder.
Vairāk informācijas
| Autors | Sandeep Sahu, Inder Pal Singh, Saurya Jyoti Banik |
|---|---|
| Izdevējs | LAP LAMBERT Academic Publishing |
| Izlaides gads | 2013 |
| Vāka tips | Mīkstais vāks |
| EAN | 9783848493791 |